Audio Out of Sync on Streaming Apps and How to Fix It
An actor's lips move, and the words arrive a beat later. Once you notice audio out of sync on a streaming show, you cannot stop seeing it, and an evening of watching turns into an evening of being slightly annoyed.

An actor's lips move, and the words arrive a beat later. Once you notice audio out of sync on a streaming show, you cannot stop seeing it, and an evening of watching turns into an evening of being slightly annoyed. The fix is usually simple, but only if you find where the delay is coming from.
Lip sync problems almost never come from the show itself. They come from the chain of devices between the streaming app and your ears: the TV, a streaming stick, a soundbar, a receiver, or Bluetooth headphones. Each one processes sound or picture a little differently, and when picture processing takes longer than audio, or the other way around, the two drift apart.
First, figure out where the audio out of sync problem starts
Spend five minutes narrowing it down before changing settings at random. Work through these checks in order.
- Try another show in the same app. If only one title is off, the problem is that file, and you can report it to the service. This is rare but it happens.
- Try another app. If one app is off and others are fine, restart or reinstall that app and clear its cache.
- Switch to the TV speakers. If sync is perfect through the TV's built-in speakers but off through a soundbar or headphones, the delay is in the audio path.
- Try another device. Play the same episode on a phone or laptop. If that is in sync, the problem sits in your TV setup, not your account.
These four checks rule out most causes in under five minutes.
Common causes and the fix for each
| Cause | Typical delay | Fix |
|---|---|---|
| Bluetooth headphones or speaker | 100 to 300 ms | Use a low latency codec or wired connection |
| TV picture processing (motion smoothing) | 50 to 150 ms | Turn off motion smoothing or enable game mode |
| Soundbar decoding surround audio | 40 to 120 ms | Adjust the soundbar's AV sync or lip sync setting |
| HDMI ARC instead of eARC | Varies | Use the eARC port and enable it in both devices |
| App or device glitch | Random, often grows | Restart the device, update the app |
Most people notice sync errors once the gap reaches about 45 ms of sound arriving early or about 125 ms of sound arriving late. That is why small delays can feel fine while Bluetooth often feels obviously wrong.
Fixing sync on a TV and soundbar
Almost every modern TV and soundbar includes a manual offset setting. The name differs by brand, so look for "AV sync," "audio delay," "lip sync" or "audio sync" in the sound menu.
Use the setting in the right place
If audio comes before the picture, add delay to the audio. If audio comes after the picture, you need to delay the picture instead, which most TVs cannot do. In that case, reduce picture processing so the image arrives faster.
- Open a scene with clear dialogue and close faces, such as a news broadcast or an interview show.
- Adjust the offset in steps of 10 to 20 ms.
- Watch for consonants like "p" and "b," where the lips close. They are the easiest to judge.
- Stop when the sound feels attached to the mouth, then watch for two more minutes to confirm.
Check the audio format
Some soundbars take longer to decode surround formats than plain stereo. If the delay only appears on shows with surround sound, set the TV's digital audio output to "Auto" or "Passthrough" so the soundbar handles decoding directly, or try "PCM" as a test. Settings named "Dolby Digital" or "Bitstream" can behave differently on different TVs, so test each for a minute.
Fixing sync with Bluetooth headphones
Bluetooth is the most common cause of lip sync problems at home. Standard Bluetooth audio adds roughly 150 to 250 ms of delay, sometimes more with cheaper earbuds.
- Check if your TV or streaming device has a Bluetooth audio delay setting. Many do, often hidden under accessibility or advanced sound menus.
- Use headphones that support low latency codecs, such as aptX Low Latency or aptX Adaptive, but only if the TV supports the same codec.
- Turn off other Bluetooth devices nearby, since interference can make the delay worse.
- For late night listening, wired headphones plugged into the TV or remote cost very little and remove the delay entirely.
If you are using headphones because dialogue is hard to hear on speakers, our guide to fixing dialogue that is too quiet on streaming shows may solve the underlying problem.
Why I do not trust "auto sync" settings
Many TVs and soundbars now offer automatic lip sync, which should detect delay and correct it. Most advice tells you to switch it on and forget about it. I keep it off on my own setup.
Auto sync relies on devices reporting their own delay over HDMI, and many devices report it badly or not at all. In my experience it often gets close but leaves a gap of 30 to 60 ms, which is just enough to feel uncomfortable without being obvious. A manual offset that you set once with a clear test scene stays correct far more reliably. Try auto first if you like, but if anything still feels off, switch to manual and trust your eyes.
When the delay drifts during an episode
If the sync is fine for the first ten minutes and gets steadily worse, it is usually a software problem, not a settings problem. Restart the streaming device fully by unplugging it for 30 seconds, check for system updates, and turn off any network-saving or data-saving mode in the app. If you are watching alongside friends in other homes, our guide to hosting a long distance watch party that stays in sync covers timing between households too.
Keep the fix from coming undone
Once sync is right, write down the setting values on your phone: the offset in milliseconds, the audio output format and whether eARC is on. TV and soundbar firmware updates sometimes reset sound settings to factory defaults without warning, and having the numbers saved turns a frustrating evening into a two minute fix. It also helps to change one thing at a time. If you adjust the soundbar offset, the TV offset and the output format in one go, you will not know which change helped, and the settings can cancel each other out. One device, one setting, one test scene is the slow route that ends up being fastest.
Frequently asked questions
Why is audio out of sync on only one streaming app?
That points to the app rather than your TV. Clear the app's cache or reinstall it, then check for updates to both the app and the device. If one show stays out of sync, report it, because the file itself may be faulty.
Does HDMI eARC fix lip sync problems?
It often helps, because eARC carries timing information more reliably than older ARC connections. Both the TV and soundbar must support eARC, and you usually need to turn it on in the TV's settings.
How do I test audio sync accurately at home?
Use a scene with a person speaking close to the camera and watch for sounds where the lips close, like "p," "b" and "m." Some streaming apps and online video sites also offer sync test clips with a flash and a beep you can compare directly.
More in Streaming and Video
Streaming and Video
Why Streaming Bitrate Matters More Than 4K Resolution
I pay for the top tier on two services so that a prestige drama arrives in 4K, and the third episode opens on a night scene lit...
Streaming and Video
How to Turn Off Autoplay on Every Streaming App
I spent a Tuesday evening in February intending to watch one episode of a forty minute drama and stood up at ten past midnight.
Streaming and Video
How to Share a Streaming Plan Without Extra Member Fees
For about a decade, sharing a streaming login was the quiet default.